1930s Classic Motorcycles Archives

Panther M100

A swift glance at the Panther M100 showed up its most striking asset. Compared with your average engine design, the M100’s looked distinctly skewed. Enter the 598cc Sloper motor. It was tilted forward 45°. If that caused technically-minded riders to be concerned about oil circulation, no worries. The M100 was eminently reliable.

The Sloper’s cylinder block was blessed with a long stroke. 100mm, to be precise. Hence an abundance of neck-twisting torque. In a good way! That was handy – since many M100s had side-cars attached. This was before automobiles were two a penny, after all. The M100’s top speed was 68mph. And if you were the one wedged in the Watsonian ‘chair’, that was probably quite quick enough!

Panther was based in Cleckheaton, Yorkshire. No surprise, then, that its bikes were solid, rugged and dependable! Panther started out as Phelon and Moore (P&M). The first Sloper-equipped bike appeared in 1904. The single-cylinder push-rod powerplant came with two air-cooled overhead valves. Sporting its dramatically-inclined mill, a parked-up Panther was guaranteed to draw a crowd. It was only made bigger by the way in which the exhausts swooped down from the steeply-banked ports. And this from a bike born and bred in Yorkshire … not a county associated with razzmatazz. As alluded to, this was a time when motorcycles and side-cars were still standard family transport. It followed that a Panther’s top priority was to get from A to B – and back again – with a minimum of fuss. The M100 accomplished that – and with style thrown in, for good measure. Connoisseurs of classic motorcycles, rejoice!

Rudge Ulster

The Rudge Ulster was based on the Rudge Multi. The latter – launched in 1911 – came with 21 ‘infinitely variable’ gears. ‘Multi’, indeed, then! In theory, there was not a slope in the UK it could not get up. An intricate rear pulley system auto-adjusted the bike’s final drive belt. The ratios were selected via a lengthy gear-lever, located to the left of the fuel-tank. From early on, Rudges sported spring-up stands. Back mudguards were hinged – facilitating wheel removal.

A production racer Multi won the 1914 Senior TT. And – for the Rudge race team – there was more success to come. It was in ’28, though, that the firm secured its place in history. A Rudge won that year’s Ulster GP. A street-legal version duly appeared. It was named after the illustrious Irish road race. The Ulster inherited the engineering subtleties of its Rudge roadster predecessors. Unsurprisingly, it was a serious seller. Graham Walker was Rudge’s sales manager. Fittingly, it had fallen to him to pilot the Ulster to victory.

The Ulster only added to the roll-call of Rudge’s technical innovations. A 500cc single, its engine was fitted with four valves. They helped output 30bhp. That pushed a dry weight of just 290lb. The Ulster featured Rudge’s linked braking system. The foot-pedal retarded both drum brakes – while the hand lever applied added front-end bite. Ahead of the game, to say the least. On the racing front, Rudge carried on winning well into the Thirties. In ’39, however, financial problems came to a head. Rudge folded shortly thereafter. The Ulster, though, had carried the flag for one of the most forward-looking firms in motorcycling history!

Norton CS1

When it comes to ‘Brit bikes’, classic Nortons are as iconic as they come. That certainly included the CS1. Norton was based in Bracebridge Street, Birmingham. In 1913, the fledgling firm went bust. In true champion style, however, it got back on its feet, dusted itself down and came out for another round! James Norton teamed up with Bob Shelley and his brother-in-law – ace tuner Dan ‘Wizard’ O’Donovan. The chemistry must have been spot-on, if the Isle of Man TT was anything to go by. Rex Judd was among the riders to win on Nortons in that most illustrious of road races.

The CS1 arrived on ‘the island’ in ’27 – prepped for its first TT outing. The ‘CamShaft 1’ production racer boasted a bevel-driven overhead cam engine. It was a sensation from the second Stanley Woods swung a leg over the saddle. Fast-forward a year – and the CS1 roadster appeared, in supersport mode. Again, rival marques were left reeling in its wake. Sadly, James ‘Pa’ Norton – company founder – died before his bikes saw success.

Before taking on the CS1, ‘Wizard’ O’Donovan had plenty of practice. He had previously built the ‘Brooklands Special’. It was designed specifically for the unique challenges of the legendary English oval. When sold, Brooklands Specials came with a certificate – confirming they had reached 75mph. Detuned Specials were sorted for street use. The roadster’s sale certificate guaranteed 70mph – just 5mph less than the racer. So, the CS1 had a tough act to follow. It did so, though, with aplomb. Stylishly engineered, it sported silver-and-black paint – Norton’s trademark colour scheme. It was a shame ‘Pa’ Norton’s heart could not hold out a little while longer. Never really a businessman, he loved bikes to the core of his being. He would have loved to have seen – and heard – one of his company’s masterpieces, at full chat. Still, at least the Norton CS1 has been exhilarating classic bike fans for many a year since!

Triumph Speed Twin

On the face of it, the Triumph Speed Twin was the quintessence of Englishness. But, it had Germany to thank for its existence. In 1902, two Germans – Siegfried Bettman and Mauritz Schulte – grafted a Belgian-made Minerva motor onto a bicycle. Believe it or not, Triumph was in business! Three years later, the Coventry-based company produced its own engine. It obviously ran well. Before too long, ‘Trusty Triumph’ had entered the biker vocabulary.

The Speed Twin was launched in ’37. Its parallel-twin motor made it faster and smoother than its single-cylinder rivals. The 498cc motor made 29bhp. Top speed was 90mph – heady stuff, at the time. The new bike was the brainchild of Edward Turner. It displayed commercial courage – as well as styling skill. The motorcycle industry is inherently conservative. In other words, “If it ain’t broke, don’t fix it!” Single-cylinder ‘thumpers’ had monopolized the market for years. Turner’s Speed Twin, then, broke the engine layout mould.

Mr. Turner did double-duty at Triumph. He was both head of design and general manager. His administrative tasks clearly did not impinge upon his creativity. The Speed Twin looked great standing still. And – with a dry weight of just 365lb – it looked even better, swinging through corners. Edward Turner – visionary that he was – had dreamed up a bike ahead of its time. The Triumph Speed Twin was a blueprint for many a motorcycle to come. ‘Brit bikes’ were on the march … and coming to a showroom near you!

Excelsior Manxman

Excelsior was the first British motorbike manufacturer. The company’s best-known machine, the Manxman, was named after the TT – Tourist Trophy. That being the ultimate devil-may-care road race – through the picturesque scenery of the Isle of Man.

In ’33, Excelsior took the Lightweight TT title. Overnight, the English firm became a motorcycling name to be reckoned with. The bike which achieved said feat was dubbed the ‘Mechanical Marvel’! Keen to capitalise on their success, Excelsior conceived a racing replica roadster. At the last, though, the project was cancelled. Excelsior were worried about long-term sales. They feared its engine might prove too complex for Clubman-level ‘tinkering’!

While that eleventh hour change of heart was a loss to amateur racing, it was a boon to road riders. Instead of the ‘race rep’ they had planned, Excelsior served up the more orthodox Manxman. Its single overhead camshaft motor came in 250, 350 and 500cc versions. For those so inclined, a bit of light tuning sorted it for the track. In standard trim, it was more than adequate for country lane heroics. In short, the Excelsior Manxman pleased everyone. In so doing, it signalled the finest hour for an historic marque!