1980s Italian Classic Sports Cars Archives

Lancia Delta HF Integrale

It would be difficult to overstate the impact made by the Lancia Delta HF Integrale. It swept aside all comers – on the road and in competition. In the year and a half following its ’87 launch, the Delta Integrale won 14 World Championship rallies. Miki Biasion made the most of its dominance. He garnered two world drivers’ titles in the car.

The Integrale’s 8-valve engine made 185bhp. In ’89, it was replaced by a 16-valve head. Power increased to 200bhp. The new model totted up 13 top-echelon rally wins. Juha Kankunnen duly took the ’91 drivers’ title. Over time, the fruits of such success trickled down to the showrooms. The road-going Integrale’s finely-tuned 4-wheel-drive set-up gave good handling – in all conditions. Combine that with a 2-litre turbocharged motor – and you had a perfect blend of speed and precision. As a hatchback, practicality was a given. But, there were luxuries, too. Like Recaro seats, electric front windows and a cutting edge instrument panel.

Wide wheels and fat tyres helped give the Integrale a look of purposeful muscularity. Giorgetto Giugiaro – at the Italdesign agency – did the styling honours. The bodywork was minimalist, not boxy! The original Delta – built for rally homologation reasons – was first glimpsed at ’79’s Frankfurt Motor Show. It was followed by a Delta dynasty of progessively more sophisticated models. Lancia’s HF acronym stood for High Fidelity. It was applied to several of the marque’s cars over the years. Never more fittingly, though, than to the Delta Integrale!

Ferrari F40

The F40’s name referenced forty years of the Ferrari marque. It was boss Enzo Ferrari’s brainchild … but, even he had to get board approval! Once given, the project was passed to Pininfarina. The doyen of Italian design agencies had a longstanding relationship with Ferrari. Just a year passed for the F40 to go from concept to production. It helped that it was based on the Ferrari 288 GTO. Theoretically, then, the F40 was a roadster. Practically, though, it required little modification to go racing. In large part, that was down to its weight – or lack of it. For a car that cost $275,000, there was a notable lack of luxury. Indeed, the cabin verged on the spartan!

The F40’s low weight was down to its bodywork. Composite materials had been used to fashion it. They were 20% lighter than their metallic counterparts would have been. That – and minimal interior décor – meant the F40 weighed in at just 2,425lb. Add a 288 GTO V8 engine – and the result was explosive! The 3-litre twin-turbocharged set-up was fitted with sequential ignition and fuel injection. There were silver/cadmium con-rod bushes and nicasil-coated liners. Grand total – 478bhp. ‘Competition mode’ threw in a further 200bhp, if needed.

The F40 topped out at 201mph. 0-60 arrived in 3.9s. On its ’87 launch, it was the fastest road-going Ferrari yet. It stayed in production until ’92. Even the standard version featured a raft of competition parts. It had Group C brakes, 3-piece wheels and removable rear bodywork. Oh, and soft fuel cells. The racing pedigree of the Ferrari F40 was clear to see!

Italdesign Aztec

The Italdesign Aztec came with dual cockpits. A 2-seater, driver and passenger were ensconced in separate ‘compartments’. It was a concept car, after all! The Aztec was made to commemorate Italdesign’s twentieth anniversary. Its designers never envisaged it on the open road. A group of maverick Japanese businessmen, however, had other ideas!

Giorgetto Giugiaro was chief stylist for the Aztec. As a rule, his work was far from flamboyant. Indeed, he had penned many a family runabout. Who knows – maybe it was just time for him to let his creative hair down. At any rate, Giugiaro was immensely proud of the Aztec. And – certainly, from a visual point of view – it was nothing, if not striking. Slick and sophisticated – and with a silvery sheen – showgoers’ eyes were riveted. The Aztec’s rear end was seriously high-tech. Wrapped around the wheel arches were ‘service centre’ panels. They housed a raft of gizmos and gadgets. There were coded door locks, built-in hydraulic jack controls and engine fluid monitors – just for starters. Somewhat more down-to-earth features included a torch and fire extinguisher. Not forgetting a petrol cap! The Aztec’s interior was equally cutting edge. Communication between the two cockpits, for example, was via electronic headsets!

The Aztec’s engine was a 5-cylinder Audi unit – turbo-charged and transversely mounted. Transmission was Quattro 4-wheel drive. A dual-canopy body allowed easy access to the bay. The Aztec was unveiled in ’88 – at the Turin Motor Show. Among the enraptured onlookers were the aforementioned suits. They were sure there might be a market for the car back in Japan. With the rights to the Aztec safely in their pockets, they set about putting it into production. 50 replicas of the prototype were due to be built – though less than half that number would roll off the line. The bodies were made in Italy. They were then shipped to Germany. There, they were entrusted to engine tuners Mayer MTM – who installed the Audi powerplants. Finally, they arrived in Japan. When transportation costs had been factored in, the Aztec retailed at the yen equivalent of $225,000. That was a lot of money. Each car, though, came with an added extra. Giorgetto Giugiaro signed every Italdesign Aztec personally. He was indeed proud of his outré creation!